Page 86 - FireClass 2015-2016
P. 86
Loop Modules
High Voltage Relay Interface
The HVR800 High Voltage Relay Interface is a non-addressable multi-voltage
relay module (operating from 24V DC, 24V AC, 120V ac and 240V AC).
The encapsulated HVR800 provides a 10 amp volt-free contact that can be used to
extend the contact ratings of FC410RIM Addressable Relay Module applications.
A maximum of four HVR800s can be individually driven and controlled by an
FC410MIO Small Addressable Multi-Input/Output module if all HVR800s are
powered by 120V ac or 240V AC. For ac operation, no external dc power supply
unit is required to operate the relay. When used to switch 24V DC, the HVR800
must be provided with an external 24V DC supply which should be switched
through the clean relay contacts of an FC410MIO or FC410RIM.
Product Order Codes
HVR800 568.800.004
Single Input/Output Module
The FC410SIO Single Input/Output Module is designed to provide a monitored
open collector input and a volt free relay changeover output. FC410SIO can switch
up to 2 A @ 24 VDC.
Product Order Codes
FC410SIO 555.800.763
Multi I/O Module
The FC410MIO Multi I/O Module has three inputs and two outputs
from latching relays. The inputs can monitor fire contacts such
as extinguishing system control, ventilation control, fire door control etc.
The two relays outputs provide volt-free relay changeover contacts.
Product Order Codes
FC410MIO 555.800.765
High Voltage Relay Interface
The HVR800 High Voltage Relay Interface is a non-addressable multi-voltage
relay module (operating from 24V DC, 24V AC, 120V ac and 240V AC).
The encapsulated HVR800 provides a 10 amp volt-free contact that can be used to
extend the contact ratings of FC410RIM Addressable Relay Module applications.
A maximum of four HVR800s can be individually driven and controlled by an
FC410MIO Small Addressable Multi-Input/Output module if all HVR800s are
powered by 120V ac or 240V AC. For ac operation, no external dc power supply
unit is required to operate the relay. When used to switch 24V DC, the HVR800
must be provided with an external 24V DC supply which should be switched
through the clean relay contacts of an FC410MIO or FC410RIM.
Product Order Codes
HVR800 568.800.004
Single Input/Output Module
The FC410SIO Single Input/Output Module is designed to provide a monitored
open collector input and a volt free relay changeover output. FC410SIO can switch
up to 2 A @ 24 VDC.
Product Order Codes
FC410SIO 555.800.763
Multi I/O Module
The FC410MIO Multi I/O Module has three inputs and two outputs
from latching relays. The inputs can monitor fire contacts such
as extinguishing system control, ventilation control, fire door control etc.
The two relays outputs provide volt-free relay changeover contacts.
Product Order Codes
FC410MIO 555.800.765
