Page 83 - FireClass 2015-2016
P. 83
81
Mini Input Module
The FC410MIM Mini Input module is designed to monitor fire contacts, such as
extinguishing system control, ventilation control, fire door control etc. The module
provides one identifiable detection spur which is capable of monitoring multiple
normally open contacts or a single normally closed contact.
The FC410MIM can be mounted in any electrical enclosure with sufficient depth to
accommodate FC410MIM and the contacts monitored by the IN+ and IN- terminals,
ie, no field wiring.The remote LED (if required, not supplied) must be located within
the same electrical enclosure.
Product Order Codes
FC410MIM 555.800.701
Contact Input Module
The FC410CIM FC Addressable Contact Input Module is designed to monitor
fire contacts such as extinguishing system control, ventilation control, fire
door control etc. The FC410CIM can be configured as:
Two spur circuits monitoring multiple normally open contacts, with short circuit
giving a fault output.
Two spur circuits monitoring single normally closed contacts, with short circuit
giving a fault output.
Product Order Codes
FC410CIM 555.800.702
Gas & Detection Module Indoor ADDRESSBALE Loop Modules
The FC410DDM provides the ability to connect and interface 2 conventional zones,
to the FireClass fire alarm controller.
The FC410DDM monitors the status of the detectors and the wiring to the detectors
and signals detector and wiring status back to the controller.
The conventional detector circuits can be configured as one Class A circuit (loop)
or two Class B spur circuits. The FC410DDM can be either loop powered or driven
from a local 24Vdc supply.
It also provides the ability to connect 2 gas detectors (supported by FC500 series
panels only).
Product Order Codes
FC410DDM 577.800.706
Mini Input Module
The FC410MIM Mini Input module is designed to monitor fire contacts, such as
extinguishing system control, ventilation control, fire door control etc. The module
provides one identifiable detection spur which is capable of monitoring multiple
normally open contacts or a single normally closed contact.
The FC410MIM can be mounted in any electrical enclosure with sufficient depth to
accommodate FC410MIM and the contacts monitored by the IN+ and IN- terminals,
ie, no field wiring.The remote LED (if required, not supplied) must be located within
the same electrical enclosure.
Product Order Codes
FC410MIM 555.800.701
Contact Input Module
The FC410CIM FC Addressable Contact Input Module is designed to monitor
fire contacts such as extinguishing system control, ventilation control, fire
door control etc. The FC410CIM can be configured as:
Two spur circuits monitoring multiple normally open contacts, with short circuit
giving a fault output.
Two spur circuits monitoring single normally closed contacts, with short circuit
giving a fault output.
Product Order Codes
FC410CIM 555.800.702
Gas & Detection Module Indoor ADDRESSBALE Loop Modules
The FC410DDM provides the ability to connect and interface 2 conventional zones,
to the FireClass fire alarm controller.
The FC410DDM monitors the status of the detectors and the wiring to the detectors
and signals detector and wiring status back to the controller.
The conventional detector circuits can be configured as one Class A circuit (loop)
or two Class B spur circuits. The FC410DDM can be either loop powered or driven
from a local 24Vdc supply.
It also provides the ability to connect 2 gas detectors (supported by FC500 series
panels only).
Product Order Codes
FC410DDM 577.800.706
