Page 84 - FireClass 2015-2016
P. 84
Loop modules
Detector Input Module
The Addressable FC410DIM provides the ability to connect and Interface one zone
of conventional detectors (non-addressable) to the Fire Alarm Controller.
The FC410DIM monitors the status of detectors and wiring to detectors and
signals detector and wiring status back to the Controller.
The FC410DIM requires a 24Vdc power supply.
Product Order Codes
FC410DIM 555.800.712
Beam Detector Interface Module
The FC410BDM Beam Detector Interface Module is designed to power and
interface one FIRERAY 50/100/3000/5000 Beam Detector to the FireClass Digital
Addressable Loop.
The FC410BDM monitors the Fire and Fault contacts and also monitors for open
and short circuits on the connections between the interface and the beam detector.
For remote siting of the FIRERAY detector an optional BTM800 Terminal Module
can be used.
Product Order Codes
FC410BDM 555.800.766
Beam Detector Module
In many cases it will be necessary to site the FC410BDM Beam Detector Module
some distance from the beam detector itself. To minimize and simplify wiring in
such cases an optional unit, the BTM800 beam termination module is available.
The BTM800 is also housed in a standard double gang ancillary cover and has all
the connections and components required to minimize installation time.
Product Order Codes
BTM800 555.800.067
Detector Input Module
The Addressable FC410DIM provides the ability to connect and Interface one zone
of conventional detectors (non-addressable) to the Fire Alarm Controller.
The FC410DIM monitors the status of detectors and wiring to detectors and
signals detector and wiring status back to the Controller.
The FC410DIM requires a 24Vdc power supply.
Product Order Codes
FC410DIM 555.800.712
Beam Detector Interface Module
The FC410BDM Beam Detector Interface Module is designed to power and
interface one FIRERAY 50/100/3000/5000 Beam Detector to the FireClass Digital
Addressable Loop.
The FC410BDM monitors the Fire and Fault contacts and also monitors for open
and short circuits on the connections between the interface and the beam detector.
For remote siting of the FIRERAY detector an optional BTM800 Terminal Module
can be used.
Product Order Codes
FC410BDM 555.800.766
Beam Detector Module
In many cases it will be necessary to site the FC410BDM Beam Detector Module
some distance from the beam detector itself. To minimize and simplify wiring in
such cases an optional unit, the BTM800 beam termination module is available.
The BTM800 is also housed in a standard double gang ancillary cover and has all
the connections and components required to minimize installation time.
Product Order Codes
BTM800 555.800.067
